Results 1 to 2 of 2

Thread: getting a new mic

  1. #1
    Inactive Member AdamTheGreat's Avatar
    Join Date
    June 28th, 2005
    Posts
    1
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    and also, im getting a new mic for making movies. ive narrowed it down to these 2, which would yall go with?

    SENNHEISER MKE300 - http://www.evsonline.com/merchant2/m...oduct_Count=17

    or

    AZDEN SGM-1X - http://www.evsonline.com/merchant2/m...roduct_Count=3

  2. #2
    Senior Hostboard Member miker's Avatar
    Join Date
    August 16th, 1999
    Posts
    2,621
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    You can't really go wrong with anything from Sennheiser IMO. I used the MKE300 (along with a soundman recording to minidisc) on my short Ad Astra.

    HOWEVER

    The MKE300 uses a minijack (unbalanced audio = shorter cables) whereas I see the Azden uses XLR output (three pin balanced audio = long long long cables without perceptable noise creeping in).

    In theory the Azden also captures a wider range of frequencies, particularly at the low end. Which is also where most of the handling noise is anyway, and the cut-off puts that to 200Hz which makes it about equal with the Sennheiser anyhow.

    I'm not familiar with the Azden brand, but a "professional" microphone with XLR connectors would normally cost upwards of about $800 I would think (I bought a Sennheiser K6 and ME66 mic module for around ?600 just over a year ago).

    I don't think you'd be disappointed with the Sennheiser, it doesn't pretend to be anything other than optimised for the "low end" videographer whereas I feel the Azden is pretending to be something else.

    It's your choice but I'd resist the pretense of the Azden and get the Sennheiser.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •